Are you looking for JAC Class 11 Physics “Mechanical Properties of Fluids” MCQs (Objective Questions) with Answers? You are at the right place! On JAC Exam Prep, you will find important Multiple Choice Questions (MCQs) with Answers from the “Mechanical Properties of Fluids” chapter. These questions are prepared according to the latest NCERT syllabus and with a focus on the Jharkhand Academic Council (JAC) examination.
These MCQs cover important topics such as pressure, Pascal’s law, atmospheric pressure, streamline flow, the equation of continuity, Bernoulli’s principle and its applications, viscosity, Stokes’ law, terminal velocity, Reynolds number, surface tension, surface energy, angle of contact, and capillary rise. By practising these questions, students can revise the chapter effectively, strengthen their conceptual understanding, and perform better in the JAC Class 11 Annual Examination.
Which property of a body makes it regain its original size and shape when the applied force is removed?
सही उत्तर:B. Elasticity
The tendency of a body to regain its original size and shape after the deforming force is removed is called elasticity. Plasticity is the opposite behaviour, where the deformation stays.
2
Why are putty and mud called plastic substances?
सही उत्तर:D. They stay deformed after the force is removed
Putty and mud have no tendency to regain their shape and get permanently deformed, which is plasticity. Option A describes elastic behaviour.
3
The restoring force developed per unit area of a deformed body is called
सही उत्तर:A. stress
Restoring force per unit area is defined as stress, given by \(\dfrac{F}{A}\). Strain is the fractional change in dimension, so B is wrong.
4
What is the SI unit of stress?
सही उत्तर:C. \(\text{N m}^{-2}\)
Stress is force per unit area, so its unit is \(\text{N m}^{-2}\) or pascal. Option A is the unit of force only.
5
A force of \(200\ \text{N}\) acts normally on a cross-sectional area of \(0.01\ \text{m}^2\). What is the stress?
सही उत्तर:C. \(2\times10^{4}\ \text{N m}^{-2}\)
Stress \(=\dfrac{F}{A}=\dfrac{200}{0.01}=2\times10^{4}\ \text{N m}^{-2}\). Option D comes from dividing by \(10^{-4}\) by mistake.
6
What is the dimensional formula of stress?
सही उत्तर:A. \([ML^{-1}T^{-2}]\)
Stress is force divided by area, so its dimensions are \(\dfrac{[MLT^{-2}]}{[L^{2}]}=[ML^{-1}T^{-2}]\). Option B is the dimensional formula of force.
7
Strain has which of the following?
सही उत्तर:D. No unit and no dimensional formula
Strain is a ratio of two similar quantities, so it has no unit and no dimensional formula. It only looks like a pressure if stress is confused with strain.
8
The ratio of the change in length to the original length of a stretched rod is called
सही उत्तर:B. longitudinal strain
Longitudinal strain is defined as \(\dfrac{\Delta L}{L}\). Shearing strain involves a sideways displacement instead of a change in length.
9
For a cylinder acted on by a shearing force, the shearing strain is the relative displacement \(\Delta x\) of the faces divided by
सही उत्तर:D. the length \(L\) of the cylinder
Shearing strain \(=\dfrac{\Delta x}{L}=\tan\theta\), where \(L\) is the length of the cylinder. Dividing by area or force would not give a dimensionless ratio of lengths.
10
For a very small angle \(\theta\), the shearing strain \(\tan\theta\) is nearly equal to which of the following?
सही उत्तर:B. \(\theta\)
For small angles, \(\tan\theta\approx\theta\), so shearing strain is approximately equal to the angle \(\theta\) in radian.
11
A solid sphere is placed deep in a fluid and is compressed uniformly on all sides. What happens to the sphere?
सही उत्तर:C. Only its volume changes
Under hydraulic compression the volume decreases but the geometrical shape remains the same. This is why the strain is called volume strain.
12
The volume of a solid decreases from \(200\ \text{cm}^3\) to \(199.5\ \text{cm}^3\) under hydraulic pressure. What is the magnitude of the volume strain?
सही उत्तर:A. \(2.5\times10^{-3}\)
Volume strain \(=\dfrac{\Delta V}{V}=\dfrac{0.5}{200}=2.5\times10^{-3}\). Option C results from forgetting to divide by the full volume of \(200\ \text{cm}^3\).
13
According to Hooke's law, for small deformations the stress in a body is
सही उत्तर:A. directly proportional to the strain
Hooke's law states that stress \(\propto\) strain, so stress \(=k\times\) strain. The constant \(k\) is the modulus of elasticity.
14
The constant of proportionality in Hooke's law is called the
सही उत्तर:C. modulus of elasticity
In stress \(=k\times\) strain, the constant \(k\) is the modulus of elasticity. Yield strength is a stress value at the yield point, not a ratio.
15
In the linear region of a stress-strain curve of a metal, what happens when the load is removed?
सही उत्तर:B. The body regains its original dimensions
In the linear region Hooke's law is obeyed and the solid behaves as an elastic body, so the original dimensions are regained. A permanent set appears only beyond the yield point.
16
On a stress-strain curve, the point up to which the body still returns to its original dimension, but beyond which it does not, is called the
सही उत्तर:D. yield point
The yield point, also called the elastic limit, marks the end of recoverable deformation. Beyond it the deformation becomes plastic.
17
A wire is stretched beyond its yield point and then the load is completely removed. What is observed?
सही उत्तर:B. The strain is not zero even though the stress is zero
Beyond the yield point the material shows a permanent set, so some strain remains even at zero stress. A is wrong because the deformation is plastic.
18
The maximum stress point D on a stress-strain curve is known as the
सही उत्तर:A. ultimate tensile strength
The stress at the highest point of the curve is the ultimate tensile strength of the material. Beyond it, extra strain is produced even by a smaller applied force.
19
A material is said to be brittle when its ultimate strength point and fracture point are
सही उत्तर:D. close to each other
If the ultimate strength and fracture points are close, the material breaks soon after its maximum stress, so it is brittle. If they are far apart, it is ductile.
20
Which of the following materials is considered brittle?
सही उत्तर:C. Glass
The chapter states that glass is brittle while brass is not. Metals like copper and steel can be drawn out considerably before fracture.
21
Substances like rubber and the tissue of the aorta, which can be stretched to cause large strains, are called
सही उत्तर:C. elastomers
Materials that show very large elastic strains, such as rubber and aortic tissue, are called elastomers. They do not obey Hooke's law over most of their range.
22
Young's modulus is defined as the ratio of
सही उत्तर:D. tensile stress to longitudinal strain
Young's modulus is \(Y=\dfrac{\sigma}{\varepsilon}\), the ratio of tensile or compressive stress to longitudinal strain. Option A defines shear modulus.
23
A wire has a tensile stress of \(4\times10^{8}\ \text{N m}^{-2}\) and a longitudinal strain of \(2\times10^{-3}\). What is its Young's modulus?
सही उत्तर:A. \(2\times10^{11}\ \text{N m}^{-2}\)
\(Y=\dfrac{\text{stress}}{\text{strain}}=\dfrac{4\times10^{8}}{2\times10^{-3}}=2\times10^{11}\ \text{N m}^{-2}\). Option D comes from multiplying instead of dividing.
24
Why is the SI unit of Young's modulus the same as the unit of stress?
सही उत्तर:B. Strain is a dimensionless quantity
Since strain has no unit, dividing stress by strain leaves the unit of stress, \(\text{N m}^{-2}\) or Pa.
25
A wire of length \(2\ \text{m}\) and cross-sectional area \(1\times10^{-6}\ \text{m}^2\) has Young's modulus \(2\times10^{11}\ \text{N m}^{-2}\). How much does it stretch under a load of \(100\ \text{N}\)?
सही उत्तर:D. \(1\times10^{-3}\ \text{m}\)
\(\Delta L=\dfrac{FL}{AY}=\dfrac{100\times2}{10^{-6}\times2\times10^{11}}=1\times10^{-3}\ \text{m}\). Option C results from forgetting to divide by \(Y\) correctly.
26
Steel is considered more elastic than copper because, for the same load, steel
सही उत्तर:C. stretches less
A material that stretches less for a given load has a larger Young's modulus and is more elastic. The common belief that a material which stretches more is more elastic is a misnomer.
27
A steel wire of length \(4.7\ \text{m}\) and cross-sectional area \(3.0\times10^{-5}\ \text{m}^2\) stretches by the same amount as a copper wire of length \(3.5\ \text{m}\) and cross-sectional area \(4.0\times10^{-5}\ \text{m}^2\) under the same load. What is the ratio of Young's modulus of steel to that of copper?
सही उत्तर:B. \(1.79\)
For the same \(F\) and \(\Delta L\), \(Y\propto\dfrac{L}{A}\). So \(\dfrac{Y_s}{Y_c}=\dfrac{4.7}{3.0}\times\dfrac{4.0}{3.5}\approx1.79\). Option A is the inverted ratio.
28
Another name for the shear modulus is
सही उत्तर:A. modulus of rigidity
The ratio of shearing stress to shearing strain is called the shear modulus or modulus of rigidity, denoted by \(G\).
29
Which expression gives the shear modulus \(G\) in terms of force \(F\), area \(A\) and angle \(\theta\)?
A shearing stress of \(2\times10^{5}\ \text{N m}^{-2}\) acts on a material whose shear modulus is \(4\times10^{9}\ \text{N m}^{-2}\). What is the shearing strain?
सही उत्तर:B. \(5\times10^{-5}\)
Shearing strain \(=\dfrac{\text{stress}}{G}=\dfrac{2\times10^{5}}{4\times10^{9}}=5\times10^{-5}\). Option C comes from multiplying stress and modulus.
31
For most materials, the shear modulus \(G\) is approximately equal to
सही उत्तर:D. \(\dfrac{Y}{3}\)
The chapter notes that for most materials \(G\approx\dfrac{Y}{3}\), so the shear modulus is generally smaller than Young's modulus.
32
Shearing stress is possible only in
सही उत्तर:C. solids
Only solids have a definite shape and can resist a sideways displacement of their layers, so shear stress exists only in solids.
33
Bulk modulus is the ratio of hydraulic stress to
सही उत्तर:C. volume strain
Bulk modulus is \(B=-\dfrac{p}{\Delta V/V}\), the ratio of hydraulic stress to volume strain.
34
Why does the formula for bulk modulus contain a negative sign?
सही उत्तर:B. The volume decreases when the pressure increases
When \(p\) is positive, \(\Delta V\) is negative, so the negative sign makes \(B\) positive for a system in equilibrium.
35
The reciprocal of the bulk modulus is called
सही उत्तर:A. compressibility
Compressibility is \(k=\dfrac{1}{B}\), the fractional change in volume per unit increase in pressure.
36
Which of the following has the largest bulk modulus?
सही उत्तर:D. Steel
Bulk moduli of solids are much larger than those of liquids, which are in turn much larger than those of gases. Steel is a solid, so it has the largest value here.
37
Why are gases much more compressible than solids?
सही उत्तर:D. Their molecules are very poorly coupled to neighbours
In gases the molecules are very poorly coupled to their neighbours, so they are easy to compress. In solids the tight coupling makes them nearly incompressible.
38
The bulk modulus of a material is \(B=\dfrac{p}{\Delta V/V}\) in magnitude. A pressure of \(3\times10^{7}\ \text{N m}^{-2}\) produces a volume strain of \(1.5\times10^{-2}\). What is \(B\)?
सही उत्तर:A. \(2\times10^{9}\ \text{N m}^{-2}\)
\(B=\dfrac{3\times10^{7}}{1.5\times10^{-2}}=2\times10^{9}\ \text{N m}^{-2}\). Option D comes from multiplying the two values.
39
Which statement about the compressibility of matter is correct?
सही उत्तर:C. Solids are the least compressible and gases are the most compressible
Solids have very large bulk moduli and gases have very small ones, so solids are the least compressible and gases the most compressible.
40
Take the bulk modulus of water as \(2.2\times10^{9}\ \text{N m}^{-2}\), its density as \(1000\ \text{kg m}^{-3}\) and \(g=10\ \text{m s}^{-2}\). What is the fractional compression of water at the bottom of a \(1000\ \text{m}\) deep ocean?
सही उत्तर:B. \(4.5\times10^{-3}\)
The pressure is \(p=h\rho g=1000\times1000\times10=10^{7}\ \text{N m}^{-2}\). Then \(\dfrac{\Delta V}{V}=\dfrac{10^{7}}{2.2\times10^{9}}\approx4.5\times10^{-3}\).
41
Poisson's ratio is defined as the ratio of
सही उत्तर:B. lateral strain to longitudinal strain
Poisson's ratio is \(\dfrac{\Delta d/d}{\Delta L/L}\), the ratio of lateral strain to longitudinal strain in a stretched wire.
42
Which statement about Poisson's ratio is correct?
सही उत्तर:C. It is a pure number with no dimensions
Poisson's ratio is a ratio of two strains, so it is a pure number with no units or dimensions.
43
A stretched wire has a lateral strain of \(5\times10^{-4}\) and a longitudinal strain of \(2\times10^{-3}\). What is its Poisson's ratio?
सही उत्तर:D. \(0.25\)
Poisson's ratio \(=\dfrac{5\times10^{-4}}{2\times10^{-3}}=0.25\). Option A is the inverted ratio.
44
The elastic potential energy stored per unit volume of a stretched wire is
सही उत्तर:A. \(\dfrac{1}{2}\sigma\varepsilon\)
The energy per unit volume is \(u=\dfrac{1}{2}\times\text{stress}\times\text{strain}\). Option B misses the factor \(\dfrac{1}{2}\) that comes from the average force during stretching.
45
A wire has stress \(2\times10^{6}\ \text{N m}^{-2}\) and strain \(1\times10^{-5}\). What is the elastic energy stored per unit volume?
सही उत्तर:A. \(10\ \text{J m}^{-3}\)
\(u=\dfrac{1}{2}\times2\times10^{6}\times1\times10^{-5}=10\ \text{J m}^{-3}\). Option B forgets the factor \(\dfrac{1}{2}\).
46
When a wire is stretched, the work done against inter-atomic forces is stored in it as
सही उत्तर:D. elastic potential energy
The work done in stretching is stored in the wire as elastic potential energy, which is released when the wire is allowed to return to its original length.
47
Why are beams used in bridges often given an I-shaped cross-section?
सही उत्तर:C. It saves weight and cost without losing strength
The I-shape gives a large load-bearing surface and enough depth to prevent bending, while reducing the weight and cost of the beam.
48
A beam is loaded at its centre. To reduce its bending most effectively for a given material and load, which dimension should be increased?
सही उत्तर:B. Depth \(d\)
The sag \(\delta\) is proportional to \(d^{-3}\) but only to \(b^{-1}\), so increasing the depth is much more effective. Increasing the span \(l\) would increase the bending.
49
A deep, thin bar under load bending sideways is called
सही उत्तर:B. buckling
When the depth of a bar is increased too much and the load is not exactly in the right place, the bar bends sideways. This is called buckling.
50
A crane rope must carry a load of mass \(5000\ \text{kg}\) without permanent deformation. Take the yield strength as \(250\times10^{6}\ \text{N m}^{-2}\) and \(g=10\ \text{m s}^{-2}\). What is the minimum cross-sectional area of the rope?
सही उत्तर:D. \(2\times10^{-4}\ \text{m}^2\)
\(A\ge\dfrac{Mg}{\sigma_y}=\dfrac{5000\times10}{250\times10^{6}}=2\times10^{-4}\ \text{m}^2\). Option C comes from using \(g=20\) by mistake.
51
Why is the maximum height of a mountain on Earth limited to about \(10\ \text{km}\)?
सही उत्तर:C. The shearing stress from the weight above can make rocks flow
The base of a mountain is not under uniform compression, so a shear stress develops. If it exceeds the critical shearing stress of the rock, the rock flows.
52
A steel cable of radius \(1.5\ \text{cm}\) has a maximum allowed stress of \(10^{8}\ \text{N m}^{-2}\). Take \(\pi=3.14\). What is the maximum load it can support?
सही उत्तर:A. \(7.1\times10^{4}\ \text{N}\)
\(F=\text{stress}\times\pi r^{2}=10^{8}\times3.14\times(1.5\times10^{-2})^{2}\approx7.1\times10^{4}\ \text{N}\). Option C comes from using the diameter instead of the radius.
53
A wire hangs from a ceiling with a weight \(F\) attached at its lower end. If the cross-sectional area of the wire is \(A\), what is the tensile stress in it?
सही उत्तर:A. \(\dfrac{F}{A}\)
The tension at any cross-section is just \(F\), not \(2F\), even though the ceiling also pulls with a force \(F\). So the stress is \(\dfrac{F}{A}\).
54
Why is stress not called a vector quantity?
सही उत्तर:C. It cannot be assigned a specific direction, unlike force
Stress cannot be assigned a specific direction, whereas the force acting on one side of a section has a definite direction. So stress is not a vector.
55
Hooke's law is valid only in which part of the stress-strain curve?
सही उत्तर:D. The linear part
Hooke's law holds only in the linear part of the stress-strain curve, where stress is proportional to strain.
56
Young's modulus and shear modulus are relevant for which type of matter?
सही उत्तर:B. Solids only
Only solids have definite length and shape, so Young's modulus and shear modulus apply only to solids.
57
The bulk modulus is relevant for which states of matter?
सही उत्तर:D. Solids, liquids and gases
The bulk modulus describes the change in volume under uniform stress, which can happen in solids, liquids and gases.
58
Two materials are compared under the same load. Which one is more elastic in the physics sense?
सही उत्तर:B. The one that stretches less
A material that stretches less for the same load has a larger Young's modulus and is considered more elastic.
59
A copper bar of cross-section \(15.2\ \text{mm}\times19.1\ \text{mm}\) is pulled with a force of \(44500\ \text{N}\). Take \(Y=1.1\times10^{11}\ \text{N m}^{-2}\). What is the strain produced?
सही उत्तर:A. \(1.4\times10^{-3}\)
Area \(=15.2\times10^{-3}\times19.1\times10^{-3}\approx2.9\times10^{-4}\ \text{m}^2\), so stress \(\approx1.53\times10^{8}\ \text{N m}^{-2}\). Strain \(=\dfrac{1.53\times10^{8}}{1.1\times10^{11}}\approx1.4\times10^{-3}\).
60
The stress-strain curve of the elastic tissue of the aorta shows that it
सही उत्तर:C. does not obey Hooke's law over most of its elastic region
Aortic tissue has a very large elastic region, but it does not obey Hooke's law over most of it. It also has no well defined plastic region.
61
The bulk modulus of glass is \(3.7\times10^{10}\ \text{N m}^{-2}\). What is the fractional change in volume of a glass slab under a hydraulic pressure of \(1.0\times10^{6}\ \text{N m}^{-2}\)?
The bulk modulus of water is \(2.2\times10^{9}\ \text{N m}^{-2}\). What change in pressure compresses a given volume of water by \(0.10\) percent?
सही उत्तर:A. \(2.2\times10^{6}\ \text{N m}^{-2}\)
A compression of \(0.10\) percent means \(\dfrac{\Delta V}{V}=10^{-3}\). So \(p=B\times\dfrac{\Delta V}{V}=2.2\times10^{9}\times10^{-3}=2.2\times10^{6}\ \text{N m}^{-2}\).
63
The density of water at the surface is \(1.03\times10^{3}\ \text{kg m}^{-3}\) and its bulk modulus is \(2.2\times10^{9}\ \text{N m}^{-2}\). Take \(1\ \text{atm}=1.013\times10^{5}\ \text{N m}^{-2}\). What is its density at a depth where the pressure rise is \(80\ \text{atm}\)?
सही उत्तर:B. \(1.034\times10^{3}\ \text{kg m}^{-3}\)
\(\dfrac{\Delta V}{V}=\dfrac{80\times1.013\times10^{5}}{2.2\times10^{9}}\approx3.7\times10^{-3}\). The density rises by the same fraction, so \(\rho\approx1.03\times10^{3}\times1.0037\approx1.034\times10^{3}\ \text{kg m}^{-3}\).
64
In hydraulic compression, the internal restoring force per unit area is equal in magnitude to
सही उत्तर:D. the applied hydraulic pressure
The internal restoring force per unit area, called hydraulic stress, is equal in magnitude to the hydraulic pressure applied by the fluid.
65
Four identical hollow steel columns support a structure of mass \(50000\ \text{kg}\) equally. Each column has inner radius \(0.30\ \text{m}\) and outer radius \(0.60\ \text{m}\). Take \(Y=2.0\times10^{11}\ \text{N m}^{-2}\), \(g=9.8\ \text{m s}^{-2}\) and \(\pi=3.14\). What is the compressional strain of each column?
सही उत्तर:A. \(7.2\times10^{-7}\)
Load per column \(=\dfrac{50000\times9.8}{4}=1.225\times10^{5}\ \text{N}\) and area \(=\pi(0.36-0.09)\approx0.848\ \text{m}^2\). Strain \(=\dfrac{1.225\times10^{5}}{0.848\times2.0\times10^{11}}\approx7.2\times10^{-7}\).
66
Why are crane ropes made of many thin wires braided together instead of one thick wire?
सही उत्तर:D. For flexibility, ease of manufacture and strength
A single thick wire would be almost a rigid rod. Braided thin wires give flexibility, ease of manufacture and strength.
67
Compared with a pillar having rounded ends, a pillar with distributed (wide) ends supports
सही उत्तर:B. more load
A pillar with rounded ends supports less load than one with a distributed shape at the ends, so the wide-ended pillar supports more.
68
A force of \(628\ \text{N}\) stretches a wire of radius \(1.0\ \text{mm}\). Take \(\pi=3.14\). What is the stress in the wire?
सही उत्तर:C. \(2.0\times10^{8}\ \text{N m}^{-2}\)
Area \(=\pi r^{2}=3.14\times10^{-6}\ \text{m}^2\), so stress \(=\dfrac{628}{3.14\times10^{-6}}=2.0\times10^{8}\ \text{N m}^{-2}\). Option D comes from using \(r\) instead of \(r^{2}\).
69
The strain acting perpendicular to the direction of the applied force in a stretched wire is called
सही उत्तर:B. lateral strain
The strain perpendicular to the applied force is called lateral strain. Its ratio to the longitudinal strain is Poisson's ratio.
70
When a wire is stretched within its elastic limit, what happens to its diameter?
सही उत्तर:C. It decreases slightly
A wire under longitudinal strain undergoes a small lateral contraction, which is described by Poisson's ratio.
71
A wire of volume \(1\times10^{-5}\ \text{m}^3\) has a stress of \(2\times10^{8}\ \text{N m}^{-2}\) and a strain of \(1\times10^{-3}\). How much elastic energy is stored in it?
सही उत्तर:A. \(1\ \text{J}\)
Energy \(=\dfrac{1}{2}\times\text{stress}\times\text{strain}\times\text{volume}=\dfrac{1}{2}\times2\times10^{8}\times10^{-3}\times10^{-5}=1\ \text{J}\).
72
Which equation gives Hooke's law for a body under tension or compression?
सही उत्तर:D. \(\dfrac{F}{A}=Y\dfrac{\Delta L}{L}\)
For tension or compression, stress \(\dfrac{F}{A}\) equals \(Y\) times the longitudinal strain. Option A is for shear and option B is for hydraulic compression.
73
The edge of an aluminium cube is \(10\ \text{cm}\). One face is fixed to a wall and a mass of \(100\ \text{kg}\) is attached to the opposite face. Take \(G=25\ \text{GPa}\) and \(g=9.8\ \text{m s}^{-2}\). What is the vertical deflection of this face?
On a stress-strain curve, what does the region beyond the yield point, where strain rises rapidly for a small change in stress, show?
सही उत्तर:A. Plastic deformation
Beyond the yield point the body does not regain its original dimensions after unloading. This permanent change is plastic deformation.
75
The yield point of a material is also known as its
सही उत्तर:B. elastic limit
Point B on the curve is called the yield point or elastic limit, and the corresponding stress is the yield strength.
76
Tensile stress and compressive stress are together also called
सही उत्तर:C. longitudinal stress
Both tensile and compressive stress act along the length and change the length of the body, so they are called longitudinal stress.
77
The elastic limit of a typical rock is \(3\times10^{8}\ \text{N m}^{-2}\) and its density is \(3\times10^{3}\ \text{kg m}^{-3}\). Take \(g=10\ \text{m s}^{-2}\). What is the maximum height of a mountain made of this rock?